| Firestik, Workman & Victory - High
Quality CB Antenna Stud Mounts, & Quick Disconnects |
| Antenna Stud Mounts, Springs and Quick Disconnects Use 3/8 X 24 Threads |
|
(K4A) Only $5.95 Heavy
Duty Stud Mount - Steel top, bottom &
bolt
The
K-4A should be used whenever a PL-259 terminated coax cable is
to be used (K-8A, K-9A, R-8A, R-9A). Like the K-4, this stud
is designed for 1/2" (13mm) holes.3/8" thread
bolt |
|
|
|
(K4) Only $4.95 The K-4 stud utilizes ring terminal connectors (supplied)making it compatible with non-PL-259 terminated coaxial cables. In a typical installation, antennas with 0.600" (15mm) of exposed threads can be used without the fear of bottoming out before proper tightening is accomplished. The K-4 can be used in any mount or mounting surface with a 1/2" (13mm) hole |
|
|
 |
(K4R) Only $3.99 The design of the Fire Ring coax termination requires the 1.25" mounting bolt that is found in the K-4R stud mount.
For use with the (Fire Ring Coaxial Cable) |
|
|
|
(M102) Only $9.95 Heavy duty stud mount. Made of stainless steel. The top, bottom,
and stud bolt are all stainless. Includes an allen wrench. Francis |
|
|
|
(Pred stud S0239) Only $19.95 Predator stabilizer stud. Heavy Duty stud mount
with stainless steel center bolt. Matches the Predator antenna. This stud is an extremely heavy duty stud for large coil antennas such as the Predator or Monkey Made. |
|
|
|
(Pred stud T) Only $21.95 Predator
stabilizer stud. Heavy Duty stud mount with stainless steel center
bolt. Matches the Predator antenna.
(Pred stud terminal type) This stud is an extremely heavy duty stud for large coil antennas such as the Predator or Monkey Made. |
|
|
|
(K4ADD) Only $9.95 Attractive
mounts for trunk and roof applications. Includes two 2 1/2" circular
discs (stainless steel top disc), mounting stud and a rubber
gasket to protect vehicle finish. The K-4DD model has a low
underside profile for confined space installs. Requires a 1/2"
hole and flat surface for installation |
|
|
|
(K4DD) Only $8.95 Attractive
mounts for trunk and roof applications. Includes two 2 1/2" circular
discs (stainless steel top disc), mounting stud and a rubber
gasket to protect vehicle finish. The K-4DD model has a low
underside profile for confined space installs. Requires a 1/2"
hole and flat surface for installation. |
|
|
|
(K1A) Only $12.95 The K-1A model has an internal locking mechanism. The K-1A can be used with any of our antennas up to 5ft (1.5m) long and with all accessories too. The actual installed size is 2.9" (74mm) high x 0.600" (15mm) diameter. The locking pin and the spring are made from stainless steel. |
|
|
|
(QD2) Only $19.95 Heavy
Duty, 100% Stainless quick disconnect from Hustler. They are
the standard 3/8"-24
threads and feature a 2 year warranty. Just press and twist and
your antenna releases. |
|
| Antenna Mount Springs |
 |
(SS3M) Only $8.95 These
springs are made from long lasting, top grade electro-polished
stainless steel. The upper and lower inserts are made of chrome-plated
machine brass and have standard 3/8"-24 threads to fit all Firestik
antennas, mounts and accessories. Stands 3.5" high |
|
|
 |
(SS3H) Only $9.95 These
springs are made from long lasting, top grade electro-polished
stainless steel. The upper and lower inserts are made of chrome-plated
machine brass and have standard 3/8"-24 threads to fit all Firestik
antennas, mounts and accessories. Stands 3.5" high |
|
|
 |
(SSM3) Only $19.95 This spring is the best of the best. It is made from 100% solid stainless steel and incorporates a braided strap in the center. Heavy
duty barrel type spring, 3/8"-24
threads, made by Hustler Stands 5"
tall |
|
|
| |
Antenna Mounts are on Pg 1 |
|
| |
« Prev Page: 1 2 |
|
| |
