| Firestik, Workman & Victory - High
Quality CB Antenna Brackets & Mounts |
| Firestik flat
surface mounts - All mounts & Studs use a 3/8 X 24 thread |
|
(SS124A) Only $9.95 This
mount is our most popular stainless steel mount for flat surface
applications. The bracket itself is about 4" (102mm) long
by 1" (25mm) wide. The supplied stainless
steel mounting bolt is a hefty 3/8"-24 x 1" long and
includes a stainless steel nut and washers. This mount may be
used with antennas up to 4' (1.2m) long. |
|
|
|
(SSF4A) Only $13.95 If
your looking for a heavy-duty stainless steel flat mount ...
look no more. This mount offers numerous mounting options. The
bracket is 2" (51mm) wide, 5" (127mm) long and 0.100" (2.5mm)
thick stainless steel. The stud mount hole has a full 1" set
back in case you want to replace the stud with one of our Dome Mounts |
|
|
|
(SS134A) Only $14.95 This
stainless steel mount was specifically designed to mount an antenna
on the flat side-view mirror arm supports commonly found on pick-ups.
The upper bracket is 4.6" (117mm) long by 1"
(25mm) wide. The distance between the stainless steel clamping bolts
(supplied) allows the mount to span material up to 1.4" (36mm)
wide |
|
|
 |
(SS24A) Only $14.95 This
bracket is made of heavy-duty stainless steel. It includes
mounting hardware. The actual size of the bracket is 2.25" (57mm)
wide by 2.9" (74mm)
high (4.2" (107mm) with stud). It protrudes outward from
the vertical surface 1.9" (48mm). |
|
|
 |
(SS184A) Only $12.95 The
primary use for the SS-184 stainless steel mount is for antenna
installation on the new style Dodge Ram and Dakota pick-ups.
The bracket has a pre-determined bend and does not interfere
with the closing of the hood. The bracket is 2" (51mm) wide by
4.1"
(104mm) long. Due to the close quarters, the stud requires crimp-on
coaxial connectors. |
|
|
|
(VSSQRCS3) Only $22.95 Heavy
Duty clamp bracket with 180 degree swivel. Will clamp on to a vertical or horizontal bar due to the 180 degree swivel. Stud mount not included. We recommend a K4A stud mount. |
|
|
|
(VQRC-1) Only $15.95 Victory
accessories aircraft aluminum quick release mirror mount with a solid
brass SO239 stud mount.. |
|
|
|
(SS204A) Only $18.95 The
bracket and mounting hardware is made of stainless steel.
The bracket is 1.5" (38mm) wide and has a 2" (50mm)
reach for mounting inside the door jamb. Overall, the mount
is 4.2"
(105mm) long. The
stud bracket will swivel a full 180 degrees, 90 in each direction. |
|
|
|
(PSM1) Only $13.95 - This
mount was designed to bolt to the side of your vehicle. Made
by Workman. 3" tall x 1.5" wide. Extends out 2" from
side of vehicle. For antennas up to 4 feet long. Workman |
|
|
|
(K6) Only $6.95 The
brackets are made from cold rolled steel and are finished with
chrome plating. The K-6 does not include the antenna stud. The
actual size of the bracket is 2.25" (57mm) wide by 2.9" (74mm)
high. With the stud in place, the height is 4.2" (107mm). They
protrude outward from the vertical surface 1.9" (48mm). |
|
|
|
(SS64A) Only $12.95 The clamp may be omitted which will allow the angle bracket to be
used as a side bracket on any flat vertical surface, The SS-64A model
has our world famous K-4A stud mount with screw on coaxial termination.
All models come complete with stainless steel mounting hardware. |
|
|
|
(K64A) Only $9.95 The brackets
are made from cold rolled steel and are finished with chrome
plating. The actual size of the bracket is 2.25"
(57mm) wide by 2.9" (74mm) high. With the stud in place, the
height is 4.2" (107mm). They protrude outward from the vertical
surface 1.9" (48mm). Can be mounted on mirror arm horizontally
or vertically. |
|
|
 |
(JBC985) Only $15.95 Ball
mounts are the most versatile mounts made for antenna mounting.
The split ball design allows the mount to be installed on any vertical
or horizontal surface, regardless of the angle of the plane, while
allowing the antenna to remain in the desired vertical position.
The ball locks into place and will not allow the antenna to slip. Requires
coaxial cables for ring-terminal type end lugs |
|
|
| Antenna Stud Mounts, Springs and Quick Disconnects are on Pg 2 |
| Page:
1 2 Next
Page » |
|
