License
plate mount CB antenna kit with 1, 2, 3, or 4 foot antenna (JM LPCBA-x00)
The kit includes a license plate bracket, coax cable
and antenna List Price: $99.99Our Price Only $89.99
No
ground is no problem. Check out these high quality antenna
systems from Firestik for motorcycles!
The FG-64 - series,
'No ground plane' (NGP) CB antenna kits were specifically designed
to solve the problems associated with the lack of ground plane
(counterpoise). This normally occurs on vehicles constructed
of plastic, fiberglass, wood or aluminum. This includes, but
is not limited to, motorcycles, motor homes, boats, automobiles
and 18-wheeler trucks. The isolated ground plane that is built
into the FGX-648 series kits can also eliminate problems on metal
base vehicles that lack the sufficient ground plane for proper
operation. This system includes a bar mount system with spring.
Available in 2, 3, 4 ft. lengths. Black only
The LG series,
'No ground plane' (NGP) CB antenna kits were specifically designed
to solve the problems associated with the lack of ground plane
(counterpoise). This normally occurs on vehicles constructed
of plastic, fiberglass, wood or aluminum. This includes, but
is not limited to, motorcyles, motor homes, boats, automobiles
and 18-wheeler trucks. The isolated ground plane that is built
into the LGX series kits can also eliminate problems on metal
base vehicles that lack the sufficient ground plane for proper
operation. This kit includes a side body mount system. Available
in 3 or 4 ft. lengths and black or white colors.
High
quality antennas from Firestik for motorcycles!
FL-3 - The "FL" Series
antennas are the performance leader of lightweight top-loaded
CB antennas. Each is approximately 40% lighter than the equivalent
length Firestik II antenna. From the perspective of mount stress,
the lighter materials and reduced wind drag of the "FL" antennas
reduces stress by more than 60%. A 4-foot FireFly will easily
perform on a mount that is designed for antennas 3-foot or less.
At the top of every "FL" antenna you will find our
patented tunable-tip. Besides making tuning a snap, the design
broadens the antennas bandwidth and increases its power handling
capabilities. Available
in black or white colors.
FL-4 - All "FL" antennas
are 100% American made with 100% American materials. To maintain
a balance between flexibility and ruggedness, we use a custom
blended, glass fiber reinforced tube. Each is wound with double
insulated copper wire to prevent the oxidation and shorted windings
often found on non-Firestik antennas. The tunable tip mechanism
is made from rust-proof brass and has a rubber o-ring to hold
the adjuster in place after tuning. Our 3/8"-24 threaded
base will fit all Firestik mounts and accessories. Each antenna
is covered with a static reducing, water-tight sleeve containing
UV and pigment stabilizers.
Available in black or white colors.
FS-2 - If you took the
proven features and performance of the famous "KW"
series antennas and added a unique tuning mechanism to the top,
you would own the equivalent of a Firestik II, "FS" Series
antenna. Aside from the ease of tuning, the patented design broadens
the antennas bandwidth to keep SWR lower over more channels. The
upper coil extension also increases the power handling capability
of the antenna. All "FS" antennas are compatible with
autos, trucks, vans, motorcycles and ATV's in a single antenna
configuration when metallic ground plane is available. Or, they
may be used in dual (co-phased) configuration on any vehicle made
from any type of material.
Available in black, white, red or blue colors.
FS-3 - Like all CB antennas,
the "FS" antennas should be fine-tuned (SWR) in their
final mounting location. If you have ever tuned a non-tunable
tip antenna, you will have a real appreciation for the "FS" antennas.
To tune a "FS" antenna, you just pop-of the tip and
turn the adjustment screw up or down as needed. All "FS" antennas
exceed the requirements of any CB radio, new or old. Aside from
the hi-performance loading coil that maximizes the transmit/receive
functions of your CB, these top-loaded antennas will also receive
the NOAA emergency weather alert and national weather broadcasts
for radios with those features. Available
in black, white, red or blue colors.
FS-4 - The "FS" antennas
are 100% American made with 100% American materials. To maintain
a balance between flexibility and ruggedness, we use a custom
blended, glass fiber reinforced shaft. Each is wound with heavy
insulated copper wire to prevent the oxidation and shorted
windings often found on non-Firestik antennas. The tunable
tip mechanism is made from rust-proof brass and has a rubber
o-ring to hold the adjuster in place after tuning. Our 3/8"-24
threaded base has a tapered contact point that works especially
well with Firestik mounts and accessories. The tapered "lug-nut" effect
transfers stress away from the threads and reduces the possibility
of vibration induced loosening of the antenna in its mount.
Each antenna is covered with a static reducing, water-tight
sleeve containing UV and pigment stabilizers. For peek performance
we recommend that you use an 18-foot coaxial cable with these
antennas.
Available in black, white, red or blue colors.
